单选题

A.[SWITCHA] INTERFACE GIGABITETHERNET 1/0/3 [SWITCHA-GIGABITETHERNET1/0/3] PORT LINK-TYPE TRUNK [SWITCHA-GIGABITETHERNET1/0/3] PORT TRUNK ALLOW-PASS VLAN 2 3 B.[SWITCHA] INTERFACE GIGABITETHERNET 1/0/1 [SWITCHA-GIGABITETHERNET1/0/3] PORT LINK-TYPE TRUNK [SWITCHA-GIGABITETHERNET1/0/3] PORT TRUNK ALLOW-PASS VLAN 2 3 C.[SWITCHA] INTERFACE GIGABITETHERNET 1/0/1 [SWITCHA-GIGABITETHERNET1/0/3] PORT LINK-TYPE ACCESS

A[SWITCHA-GIGABITETHERNET1/0/3] PORT DEFAULT VLAN 2 3

B[SWITCHA] INTERFACE GIGABITETHERNET 1/0/3

C [SWITCHA-GIGABITETHERNET1/0/3] PORT LINK-TYPACCESS

D[SWITCHA-GIGABITETHERNET1/0/3] PORT DEFAULT VLAN 2 3

查看答案

正确答案：A （备注：此答案有误）

相似试题

问答题

现要求，属于不同网段的主机PC1、PC2、PC3之间不配置动态路由协议，即可使任意两台主机之间能够互通。，配置命令如下：请将命令补充完整或者解释命令行。….[SwitchA] (1)[SwitchA-Vlanif10] (2) [SwitchA-Vlanif10] quit[SwitchA] interface vlanif 30[SwitchA-Vlanif30] ip address 10.1.1.1 24[SwitchA-Vlanif30] quit…. [SwitchA] (3) // 在SwitchA配置IP缺省路由。……在作为核心的SwitchB设置双向静态路由[SwitchB] （4）[SwitchB] ip route-static 10.1.3.0 255.255.255.0 10.1.4.6

答案解析
问答题

CL与流分类关联[SwitchA] traffic classifier tc2[SwitchA-classifier-tc1] if-match acl 3002[SwitchA-classifier-tc1] if-match acl 3003[SwitchA-classifier-tc1] quit[SwitchA] traffic behavior tb1 // （11）[SwitchA-behavior-tb1] permit //配置流行为动作为允许报文通过[SwitchA] traffic behavior tb2[SwitchA-behavior-tb1] deny //配置流行为动作为拒绝报文通过[SwitchA-behavior-tb1] quit[SwitchA] traffic policy tp1 // （12）[SwitchA-trafficpolicy-tp1] classifier （13） behavior tb1[SwitchA] traffic policy tp2 //创建流策略[SwitchA-trafficp

答案解析